brba Posted March 2, 2017 Share Posted March 2, 2017 (edited) Ne treba primer za plastiku , ja sam ih odradio 10+ , neki voze vec godinama i traju Pobrusis ga , ne treba finije od 1000 - 1500 zadnja i onda bezbojni , ne polirat naravno , i pod lak ne racunam sprej nego pravi lak I izgleda ljepse od poliranog, da mu bas dubinu finu Sent from my iPhone using Tapatalk Edited March 2, 2017 by brba Link to comment Share on other sites More sharing options...
perka Posted March 2, 2017 Share Posted March 2, 2017 Fala, i mislio sam špricom ga nanijeti, ne vjerujem sprejevima :thumbsup: Link to comment Share on other sites More sharing options...
Gabre Posted March 2, 2017 Share Posted March 2, 2017 Ne treba primer za plastiku , ja sam ih odradio 10+ , neki voze vec godinama i traju Pobrusis ga , ne treba finije od 1000 - 1500 zadnja i onda bezbojni , ne polirat naravno , i pod lak ne racunam sprej nego pravi lak I izgleda ljepse od poliranog, da mu bas dubinu finu Sent from my iPhone using Tapatalk Kako mislis ne treba finije od 1500, pa bude plastika skroz mutna? Link to comment Share on other sites More sharing options...
Kroky Posted March 2, 2017 Share Posted March 2, 2017 Dečki sonax extreme za felge se smije spricati po laku da se skinu metalne čestice. Prao neki dan kumu autu pa vidio da je cijeli auto tockast. Lijepo se vidi narandasto pošto je bijeli auto Poslano sa mog SM-G930F koristeći Tapatalk Mozes al je preslab. Acmen: da mozes, i jos fino to utrljas u lak, pa se kasnije cudis kak je sav zgreban Link to comment Share on other sites More sharing options...
brba Posted March 2, 2017 Share Posted March 2, 2017 Probaj takvog na 1500 polit vodom pa ce izgledat prozirno lak ga zasjaji, cak i dosta grubljeg Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
goran86 Posted March 2, 2017 Share Posted March 2, 2017 Vidioo sam da to rade tako... jel lak smanjuje svjetlost? Link to comment Share on other sites More sharing options...
Tuco Posted March 2, 2017 Share Posted March 2, 2017 Kemiju moras cistiti kasnije i ne skida dobro.Pjesak se zavuce svagdje i osteti lim bar malo i ne skida gumenu diht masu. Ovo je kostalo 150 kn cetki i 10-ak sati guljenja , u mojoj garazi. Usisam , ispusem i mogu farbat. Poslano sa mog SM-J510FN koristeći Tapatalk Ovo smo koristili kad smo testirali kako počisti zavar tj da li radi mikropukotine koje se vide na rendgenu i pokazalo se kao puno bolje rješenje od četki koje stvaraju mikropukotine i ulaze u strukturu materijala i samim time ga oštećuju tj oslabljuju Ovo za farbu skidat Link to comment Share on other sites More sharing options...
Rallye VR6 Posted March 2, 2017 Share Posted March 2, 2017 Sve je to ok , samo koliko toga bi potrosio sa ovako veliku povrsinu? Celicna cetka ne osteti lim , a sitne ogrebotine ce ionako prekriti epoxy primer te spric kit Poslano sa mog SM-J510FN koristeći Tapatalk Link to comment Share on other sites More sharing options...
ZaX Posted March 2, 2017 Share Posted March 2, 2017 Jel itko sam lakirao farove nakon poliranja? Pretpostavljam da ide primer za plastiku i bezbojni lak al da priupitam, možda nisam u pravu. Evo ti link kako se to radi sa brušenjem i lakiranjem. Set možeš kupiti u Partesu. Nikako lakirati na polirano jer se oguli. Ne lakirati sa bilo kojim lakovima jer ih UV zrake i temperatura unište pa požute brzo. http://partes.hr/shop/proizvodi/komplet-za-ciscenje-i-zastitu-farova-meguiars-g2000-perfect-clarity-two-step-headlight-restoration-kit/ Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
perka Posted March 2, 2017 Share Posted March 2, 2017 :thumbsup: hvala na linku. Naravno da ne bi na polirano, to je prefino da se išta uhvati. Vidim da je i u ovom setu sprej u igri, ja sam mislio auto lak špricom nanijeti, to mi više povjerenja ulijeva. Al moglo bi se i ovim probat. Najmanji je problem opet pobrusit ne bude li valjalo Link to comment Share on other sites More sharing options...
Vila Posted March 3, 2017 Share Posted March 3, 2017 pitanje: trebam obnovit poliran rub..ponovo poliranje pasta i to ili ima nekakva čarobna pasta koja će me oslobodit muka Link to comment Share on other sites More sharing options...
ZaX Posted March 3, 2017 Share Posted March 3, 2017 pitanje: trebam obnovit poliran rub..ponovo poliranje pasta i to ili ima nekakva čarobna pasta koja će me oslobodit muka Zapravo postoji čarobna pasta i zove se Meguiar's NXT all metal polish http://partes.hr/shop/proizvodi/polir-pasta-za-sve-metalne-povrsine-meguiars-nxt-generation-all-metal-polish/ Link to comment Share on other sites More sharing options...
forinta Posted March 3, 2017 Share Posted March 3, 2017 Ima Menzerna Metal Polishing Cream pastu koja će ti to riješiti a i Chemical Guys Heavy Metal Polish također Link to comment Share on other sites More sharing options...
Vila Posted March 3, 2017 Share Posted March 3, 2017 gracias Link to comment Share on other sites More sharing options...
forinta Posted March 3, 2017 Share Posted March 3, 2017 Ništa Link to comment Share on other sites More sharing options...
Srele_St Posted March 3, 2017 Share Posted March 3, 2017 pitanje: trebam obnovit poliran rub..ponovo poliranje pasta i to ili ima nekakva čarobna pasta koja će me oslobodit muka Odličan je kec Vila. Poslano sa mog LG-H850 koristeći Tapatalk Link to comment Share on other sites More sharing options...
Vila Posted March 3, 2017 Share Posted March 3, 2017 fala druže Link to comment Share on other sites More sharing options...
Mattas Posted March 4, 2017 Share Posted March 4, 2017 Da, kec je bomba... Link to comment Share on other sites More sharing options...
Xman Posted March 4, 2017 Share Posted March 4, 2017 Sve riješeno Rucnik je fenomenalan, hvala jos jednom Link to comment Share on other sites More sharing options...
forinta Posted March 4, 2017 Share Posted March 4, 2017 Drago mi je da si zadovoljan i nema na čemu ;-) Sent from my D6603 using Tapatalk Link to comment Share on other sites More sharing options...
GonzoT5 Posted March 4, 2017 Share Posted March 4, 2017 fala druže Sta je pod haubom? Link to comment Share on other sites More sharing options...
Vila Posted March 4, 2017 Share Posted March 4, 2017 Sta je pod haubom? 1.6td..1 bar..zasad Link to comment Share on other sites More sharing options...
Fredy Posted March 4, 2017 Share Posted March 4, 2017 1.6td..1 bar..zasad Do kad si u ST? 80 20 Link to comment Share on other sites More sharing options...
Vila Posted March 4, 2017 Share Posted March 4, 2017 Do kad si u ST? 80 20 do 01.04 Link to comment Share on other sites More sharing options...
Ozy Posted March 4, 2017 Share Posted March 4, 2017 Vila care kec milina!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now